CAD/CAM & CNC Machining Night: Using Fusion 360

Come join us once a month to share and learn about using both hobbyist and professional Cad/Cam software, and CNC Machining.

First Topic:

Cad/Cam for the Hobbyist. Using Fusion 360.  Design and and build a 2d or 3d object on one of our in house CNC Machines or 3D Printers. This may take more than one meeting to  complete. A laptop with Fusion 360 is recommended but not required to attend this meeting.

Autodesk Fusion 360 is an All-in one software for design and manufacture of simple and complex 2d and 3d parts and assemblies.

Fusion 360 is offered for free for hobbyists, students, and startups companies. See http://www.autodesk.com/products/fusion-360/overview for more information.

Other topics are welcome – Please bring your projects to share with the group.

This is a FREE meetup, but has a lot of value, Please donate to CT Hackerspace to help keep the lights on and the doors open. 20$ suggested donation.

Hosted by Matthew Hubbard, CNC Machinist and Licensed Toolmaker, Hobbyist maker.

How to <a>‎find us</a>: 

CT Hackerspace at 30 Echo Lake Road, 3rd floor Watertown, CT. GPS will get you to the address, then follow Silk Street around to the back of building if the front gate is locked.

Enter rear main door on second level, and take one flight up. The Rear Entrance is located up at the top of the ramp.

This entry was posted in by . Bookmark the permalink.